Unique Engineering

• THE BEVEL PROTRACTOR IS USED TO ESTABLISH AND TEST ANGLES TO VERY CLOSE TOLERANCES
• ACCURACY: +5°
• DISPLAY INDEGREE (FOR EXAMPLE 32.655°) AND  DEGREE/MINUTE/SECOND (FOR EXAMPLE 32° 39°30°)
• SET BUTTON: PRESET THE READING CHANGE MEASURING DIRECTION 
• MODE BUTTON: CHOOSE 0~90°, 0~180° OR 0~360° DISPLAY
• ZERO/ON/OFF BUTTON: ZERO AND POWER ON/OFF 
• BATTERY CR2032, AUTOMATIC POWER OFF 
• DATA OUTPUT 
• SUPPLIED WITH SQUARE TO SET 90°
• MADE OF STAINLESS STEEL 
• OPTIONAL ACCESSORY : DATA OUTPUT CABLE (CODE 7315-50,7302-SPC3B), CLAMP (CODE 2372- CLAMP), SUITABLE FOR HEIGHT GAGES 1156,1351 AND 1250.

• Basic dc accuracy 0.5%
• CAT III 600 V safety rated
• Diode and continuity test with buzzer
• Small lightweight design for one-handed use
• Rugged, durable design
• Automatic shutdown
• Battery is easy to replace

• Accuracy: + 0.3°
• Buttons: On/off, Zero
• With Clamping Screw To Lock The Blades 
• Graduation Of Blade:1mm & 1/32"
• Made Of Stainless Steel
• Cr 2032 Battery, Automatic Power Off

• Measure depth of small groove and hole, also measure depth of tire tread
• Resolution: 0.01mm/0.0005"
• Buttons: On/off, zero, mm/inch
• Supplied with zero set surface
• Automatic power off, move the digital unit to turn on power

• The Dial Depth Gauge Offers A Correct Measured Value Since It Can Measure An Object Under Measurement With A Given Measuring Force
• Resolution 0.01mm/0.0005"
• Digital Indicator Stroke 12.7mm/0.5"
• Accuracy +20 Μm
• Buttons: On/ Off, Zero, Mm/inch, Abs, Data Preset, Change Measuring Direction
• Battery: Cr2032
• Stainless Steel Base
• Extension Rods : 12.5mm (1pc) , 25mm (1pc) , 50mm (1pc) , 75mm (1pc) , 100mm (2pcs)
• Supplied With Pointed Tips And Ball Tips
• Available With A Data Output Option
• Optional Accessories: Data Output Cable (Code 7315-50m, 7302-50m), Granite Extension Holder (Code 2141-10)

• V- Groove On Bottom For Shafts (Shafts Dia 15 ~70mm)
• With Transverse Vial 
• Supplied With Adjusting Wrench 
• Sensitivity 0.02mm/m (=0.001°)

• Automatic Power Off
• Unit: Μm, Μin
• Automatic Power Off
• Unit: Μm, Μin

• Suitable for outside micrometers up to 100mm.

• Suitable for outside micrometers up to 100mm.

Additional Information:

• Item Code: 6301

• Made Of Alloy Steel
• Meet Iso 3650
• Gage Blocks > 125mm Have Clamping Holes
• Supplied With Manufacturer Inspection Certificate.

• Made Of Medium Carbon Steel.
• Made Of Medium Carbon Steel.

Additional Information:

• Item Code: 4801-17

• Suitable for outside micrometers up to 100mm

• Suitable for outside micrometers up to 100mm

• Abs Plastic Frame, Wear Resistant Pu Tire
• Two - Section Foldable Handle
• Abs Plastic Frame, Wear Resistant Pu Tire
• Two - Section Foldable Handle

• Measure The Thickness From One Side Of Objects, Suitable For Pipes,  Tanks, Etc.
• Applicable Material: Metal, Plastic Glass, Nylon, Resin Ceramic, Ice.
• Inspection Certificate 
• Attention: Not Suitable For Casting Workpieces

• Meet Din 2267, Grade 1
• Made Of Alloy Steel
• Hardness Hrc62-65
• Diameter Accuracy: + 1 Μm 

Additional Information:

• Item Code: 4166-6d

• Meet DIN 863-3
• Measure the groove diameter of shafts and keyways
• Graduation:  0.01mm
• Non-rotating spindle
• Ratchet stop
• Supplied with setting standards (except 0-25mm)

• Digital Thickness Gauges Are Designed To Measure The Thickness Of Non-woven, Textile, Plastic, Films, And More
• Ceramic Spindle Tip And Anvil
• Buttons: On/off, Zero, Mm/inch
• Battery: Cr2032
• Automatic Power Off
• Available With A Data Output Option
• Optional Accessories: Data Output Cable (Code 7315-50m, 7302-50m)

• Applicable Holding Stem:  Ø8mm, Ø4mm, 3/8" Dia
• For Digital/ Dial Indicator & Dial Test Indicators 

Additional Information:

• Item Code: 6200-60
• Production Capacity: 60kgf

• DIAL THICKNESS GAUGES ARE DESIGNED TO MEASURE THE THICKNESS OF NON-WOVEN, TEXTILE, PLASTIC, FILMS, AND MORE
• CERAMIC SPINDLE TIP AND ANVIL

• Applicable Holding Stem: Ø8mm
• For Digital/dial Indicators And Dial Test Indicators 
• With Fine Adjustment And Dovetail Groove

• Dial Thickness Gauges Are Designed To Measure The Thickness Of Non-woven, Textile, Plastic, Films, And More
• Ceramic Spindle Tip And Anvil

• Buttons : zero, mm/inch, on/off
• Battery LR44
• Made of stainless steel
• Attention: no data output

Additional Information:

• Item Code: 4831-20A

• Applicable Holding Stem: Ø8mm
• For Digital/dial Indicators And Dial Test Indicators 
• With Fine Adjustment And Dovetail Groove